android china android os 2 2 kernel 2 6 32 build number 1.5.2

Secret Hacking codes for Android Mobile Phones

 
1. Complete Information About your Phone 


*#*#4636#*#*
This code can be used to get some interesting information about your phone and battery. It shows following 4 menus on screen:
  • Phone information
  • Battery information
  • Battery history
  • Usage statistics

2. Factory data reset
*#*#7780#*#*
This code can be used for a factory data reset. It'll remove following things:
  • Google account settings stored in your phone
  • System and application data and settings
  • Downloaded applications
It'll NOT remove:
  • Current system software and bundled application
  • SD card files e.g. photos, music files, etc.
Note: Once you give this code, you get a prompt screen asking you to click on "Reset phone" button. So you get a chance to cancel your operation.


3. Format Android Phone

*2767*3855#
Think before you give this code. This code is used for factory format. It'll remove all files and settings including the internal memory storage. It'll also reinstall the phone firmware.
Note: Once you give this code, there is no way to cancel the operation unless you remove the battery from the phone. So think twice before giving this code.


4. Phone Camera Update

*#*#34971539#*#*
This code is used to get information about phone camera. It shows following 4 menus:
  • Update camera firmware in image (Don't try this option)
  • Update camera firmware in SD card
  • Get camera firmware version
  • Get firmware update count
WARNING: Never use the first option otherwise your phone camera will stop working and you'll need to take your phone to service center to reinstall camera firmware.


5. End Call/Power

*#*#7594#*#*
This one is my favorite one. This code can be used to change the "End Call / Power" button action in your phone. Be default, if you long press the button, it shows a screen asking you to select any option from Silent mode, AirPlane mode and Power off.
You can change this action using this code. You can enable direct power off on this button so you don't need to waste your time in selecting the option.


6. File Copy for Creating Backup

*#*#273283*255*663282*#*#*
This code opens a File copy screen where you can backup your media files e.g. Images, Sound, Video and Voice memo.


7. Service Mode
*#*#197328640#*#*
This code can be used to enter into Service mode. You can run various tests and change settings in the service mode.


8. WLAN, GPS and Bluetooth Test Codes:


*#*#232339#*#* OR *#*#526#*#* OR *#*#528#*#* - WLAN test (Use "Menu" button to start various tests)

*#*#232338#*#* - Shows WiFi MAC address

*#*#1472365#*#* - GPS test

*#*#1575#*#* - Another GPS test

*#*#232331#*#* - Bluetooth test

*#*#232337#*# - Shows Bluetooth device address


9. Codes to get Firmware version information:


*#*#4986*2650468#*#* - PDA, Phone, H/W, RFCallDate

*#*#1234#*#* - PDA and Phone

*#*#1111#*#* - FTA SW Version

*#*#2222#*#* - FTA HW Version

*#*#44336#*#* - PDA, Phone, CSC, Build Time, Changelist number


10. Codes to launch various Factory Tests:


*#*#0283#*#* - Packet Loopback

*#*#0*#*#* - LCD test

*#*#0673#*#* OR *#*#0289#*#* - Melody test

*#*#0842#*#* - Device test (Vibration test and BackLight test)

*#*#2663#*#* - Touch screen version

*#*#2664#*#* - Touch screen test

*#*#0588#*#* - Proximity sensor test

*#*#3264#*#* - RAM version
  1. I got a new Android OS 2.2 Kernel 2.6.32 V1.5.0 it doesn't boot, shows android logo only. Please help me.
    Thank you very much!!
    I have the exact same problem. Seems I've put in every possible pattern known to man hoping it was the one I set in it but no luck. Someone sent the following information which I followed to a "T", but there was no effect on my tablet... still locked. If anyone can help me I'd appreciate it. Thanks a million!

    Step 1: Download and save the the firmware from 
    the link below.

    https://docs.google.com/leaf?
    id=0BxfBU2pL3otBZDFlZjk3ZWYtNDBkNS00MjY3LWJkODAtMD
    diYzA0ZTc3NWFh&hl=en&authkey=CI-u49cJ

    Step 2: After you download and save the file 
    (7inch epad 2.0 Version.rar) use an unzipping 
    program like WinZip or WinRar to Unzip and open 
    the compressed file.

    Step 3: After you open the file you will see a 
    folder named "script" copy the "script" folder to 
    a Micro SD card. But make sure that nothing else 
    is on the micro SD card.

    Step 4: Pick up your tablet but make sure that the 
    tablet is completely shut-off.

    Step 5: Insert the Micro SD Card into the tablet

    Step 6: Power on the tablet and your tablet should 
    recognize the firmware on the micro sd card and it 
    should boot it automatically.

    Step 7: After the tablet is done installing the 
    firmware, there will be a message that will prompt 
    you to take the Micro SD Card, at that point take 
    out the micro sd card and then hit the menu button 
    on the tablet and then the tablet should boot up 
    automatically.

    Step 8: Your done!
     
     
    Reply With Quote
  2. 12-05-2010, 07:46 AM#3
    MXC550 
    Junior MemberAchievements:
        
     
    Member #8186
    Join DateDec 2010
    Posts1
     
    Thanks for the instructions..
    I've followed it, but mine gives the following :
    "Prepare update files...
    Update filesystem Start.....

    Erase File-System partition.....

    --> Erase File-System partition Fail! Exit!
    Maybe the kernel don't support this NAND Flash"

    It's been showing this screen for 90min, with the loading bar on the bottom.
    Two questions: How long is this supposed to take, and is that error a problem? If yes, what do I do?

    Thanks
     
     
    Reply With Quote
  3. 01-03-2011, 09:44 PM#4
    PhntmRangr 
    Junior MemberAchievements:
        
     
    Member #11883
    Join DateJan 2011
    LocationPortsmouth, VA
    Posts1
    DeviceGeneric Apad?
     
    Hi, I just wanted to know if you ever got this resolved? I have had problems with the same error on my pad trying to reflash back to life. 

    Thanks,
    Phillip

     
     Originally Posted by MXC550 
    Thanks for the instructions..
    I've followed it, but mine gives the following :
    "Prepare update files...
    Update filesystem Start.....

    Erase File-System partition.....

    --> Erase File-System partition Fail! Exit!
    Maybe the kernel don't support this NAND Flash"

    It's been showing this screen for 90min, with the loading bar on the bottom.
    Two questions: How long is this supposed to take, and is that error a problem? If yes, what do I do?

    Thanks
     
     
    Reply With Quote
  4. 02-15-2011, 10:44 PM#5
    phisch 
    Junior MemberAchievements:
        
     
    Member #18040
    Join DateFeb 2011
    LocationIllinois
    Posts7
    DeviceAndroid Mid 7"
     

    Same issue

     
     Originally Posted by MXC550 
    Thanks for the instructions..
    I've followed it, but mine gives the following :
    "Prepare update files...
    Update filesystem Start.....

    Erase File-System partition.....

    --> Erase File-System partition Fail! Exit!
    Maybe the kernel don't support this NAND Flash"

    It's been showing this screen for 90min, with the loading bar on the bottom.
    Two questions: How long is this supposed to take, and is that error a problem? If yes, what do I do?

    Thanks




    Same unit same issue. Can you let me know if you find a resolve.
     
     
    Reply With Quote
  5. 02-18-2011, 08:07 PM#6
    phisch 
    Junior MemberAchievements:
        
     
    Member #18040
    Join DateFeb 2011
    LocationIllinois
    Posts7
    DeviceAndroid Mid 7"
     

    restoring apad

    I have the same unit. I understand that you have to use 1.6.xx as this version cannot be upgraded to 2.xx rom. I'm searching for it all over. If you happen to find a 1.6 version please let me know. bedchef@att.net

    Thanks
     
     
    Reply With Quote
  6. 03-08-2011, 02:40 AM#7
    slipknotts 
    Junior MemberAchievements:
        
     
    Member #20854
    Join DateMar 2011
    LocationPacific Northwest
    Posts1
    DevicePanImage Media Tablet (Android 2.1.6)
     
    The link posted above to a google docs page is no longer valid; however, it sounded like it didn't work anyway.

    Go to:

    Panimage - Downloads

    All the necessary information is also posted on there, as well as a downloadable .pdf document of the instructions. I was having the same problem as the OP and this worked for me to solve the problem, but your actual mileage may vary, good luck 
     
     
    Reply With Quote
  7. 04-03-2011, 02:01 PM#8
    aamir979 
    Junior MemberAchievements:
        
     
    Member #24811
    Join DateApr 2011
    Posts1
     
    works fine for me....
     
     
    Reply With Quote
  8. 06-01-2011, 12:38 PM#9
    justafisch 
    Junior MemberAchievements:
      
     
    Member #33608
    Join DateJun 2011
    Posts1
     

    Slipknotts fix works

    errormessage:--> Erase File-System partition Fail! Exit!Maybe the kernel don`t support this NAND Flash

    I have gotten the previous error message with at least ten different firmware flashes for my device. I saw this thread and decided this was the last one I would try before I finally gave up. 

    slipknotts fix with this website -> Panimage - Downloads
    was the only thing that worked for my device

    Eken M002(I think)

    Good luck!
This is a free homepage created with page4. Get your own on www.page4.com